Choose to buy components and final assembly of old computer parts left.

Minhkhoicomputer want share articles on choosing components and complete one of the old computer from discrete components.
Computer technology products is almost indispensable in every user needs them .When most people need to buy old computer to a store to buy are not looking to buy a full set of components for assembly .Maybe price is always higher than the components assembled very much.Value can difference up from 300.000 to 1.000.000 VND depending on the components.
Interior structure of the desktop is simple include mainboard (motherboard), CPU (processor), RAM (memory), hard disk drives (storage and data access), case (case ) and power (power supply for the device on).
Mainboard: There are many types like gigabyte motherboard, Asus, MSI, Foxconn, J & W, Intel, ECS ... but in the Vietnam market, the second line of popular DC many people believe that using gigabyte and asus.Cac you can buy loose parts on the sale page, and Ad as 5giay.vn, vozforums.com, vatgia.com, nhattao.com, muare.vn .....
Ram, use kingmax or kingston is the common line, but the quality is quite good.
CPU, depending on the option you choose Intel or AMD hobby people.
HDD market in Vietnam, then you should choose seagate.

mainboard brands on the market

 After purchasing our components will assemble complete computer components bought from finished.
I will assemble the relatively low pre-configured baggage you can choose higher configuration.
Main ASUS G31 P5KPL-e AM_SE 450,000 price range
E5200 dual core CPU (clocked at 2.5GHz ~) e 70,000 price range
Ram kingmax bus 2x1G 200,000 e 800 views
Maxtor 40G HDD price range of 70,000 e
Source 450W 40,000 e Arrow
Case often. 40,000 e
Step 1: Insert the CPU into the main.

installed in the motherboard cpu

 Check to see if the cpu socket pins are bent not on the main cpu then repeat in form. This is the main line to the housing socket 775 cpu relatively simple. The other socket line you just based on triangular yellow lines on the cpu to mount for accurate offline.
  Step 2: Insert the CPU heatsink

Insert heatsik

 Add one layer on the surface of the heat sink and cpu fan mounted on the mount in the form above then power the fan (4 wires from the fan mounted on the main it).
Note: You must rotate the peg 4 black as framed as shown on the left hand under the direction clockwise when new hit tight. if liquid cpu fan will lead to crashes a long hot day will die or main cpu.
Step 3: ram into the main assembly.

ram into main

DC ram slots divided into two unequal parts of your ram to investigate so as to emphasize the ram feet will sink out and share audio settings body hugging white ram (Figure 2) Avoid the situation upside will burn the legs ram (note this).
Step 4: Insert into the case and the main power connector (power) with hardware devices.

Insert power

 

Insert power 12V

This section simply you just plug the 24pin power and 12V to like in the picture is complete.

Insert HDD power &cab sata

  This section is similar to the above to proceed. The follow you in shape.
Step 5: Set jumper USB, AUDIO, reset, power for the case.

Jump power & reset

 This is a slightly difficult for those who are not specialists should your little specific guidance.
Part jumper power, reset, HDD LED, power LED on the main manufacturers always choose black to distinguish it from the jump audio and USB. Often the bottom of each leg are denoted jump to the DC easier installation. (Figure 2 bottom left hand) But also one of the cases, the manufacturer does not leave instructions. If you see a panel similar in shape, then you just set that is similar to DC.
Part HDD LED and Power LED, the leg (+) is always one foot from left offline.

Jump audio & USB

 Section audio and usb quite simple for you to check out the leg room between the main and the jack on the case so that both are ok.
Now just reboot and start installing window only. I wish you success.
Do you have any questions on the cmt below I will answer fully.